• Kostenloser Versand ab 250 €
  • Persönliche Beratung
  • Individuelle Fertigung
0,00 € 0

Warenkorb

Es befinden sich keine Produkte im Warenkorb.

Einkauf fortsetzen

TCT and cermet circular saw blades for metal

Carbide-tipped thin-kerf circular saw blades from ARNTZ for carbide circular sawing machines and cold saws: cermet for structural and carbon steel, carbide uncoated and PVD-coated (TiAlN, AlTiN) also for higher-strength steels and stainless steel. Ø 250–580 mm, bore 32–80 mm with common pin holes. From stock – order by noon for same-day dispatch. Buying guide & FAQ

Subcategories

Products (selection)

View all 84 products in the shop

Product pages, basket and checkout are in German. Questions? Phone +49 9346 92230 or WhatsApp +49 171 4189690 – we also answer in English.

Choosing the right TCT and cermet circular saw blades

Carbide-tipped thin-kerf circular saw blades cut steel on carbide circular sawing machines and cold saws designed for carbide – at cutting speeds of about 80 to 250 m/min instead of 10 to 50 m/min with HSS. The narrow kerf width of 2.0 to 3.0 mm saves material and drive power, and the brazed cermet or carbide tips ensure long tool life and clean cut surfaces with little burr. All blades here come from ARNTZ and are available from stock.

Cermet, carbide or PVD-coated?

VersionApplicationIn the shop
Cermet
uncoated or TiAlN
Structural and carbon steel up to approx. 750 N/mm², solid material, tubes, profiles – smooth cut surfaces, long tool life in series cuttingØ 250–580 mm, Z40–Z144, also Q-CIRC
Carbide, uncoatedStructural and carbon steel up to approx. 900 N/mm²Ø 460 mm, Z40–Z80
Carbide, PVD-coated
TiAlN, AlTiN, Q-CIRC PRO
Alloyed and higher-strength steels, stainless steel, tubesØ 250–560 mm, Z40–Z120

WSH-Tools.de offers all common PVD coatings for its tools. For slow-running cold saws, there are our HSS metal circular saw blades.

Reading the dimensions: diameter × kerf width/body × bore

Example 285 × 2,0/1,75 × 40: 285 mm diameter, 2.0 mm kerf width at the cutting edges, 1.75 mm blade body, 40 mm bore. Diameter, bore and pin holes must match the machine; the machine manufacturer specifies the kerf width.

Number of teeth and pitch

The pitch T = π × D ÷ Z is stated for every blade. Coarse pitch (from approx. 16 mm) for solid material of medium and large diameters, medium pitch (11–16 mm) for smaller solid cross-sections and thick-walled tubes, fine pitch (below 11 mm) for tubes and profiles.

Pin holes

Typical examples are bore 32 mm with 4/9/50 + 4/11/63, bore 40 mm with 4/11/63 + 4/11/80 or 2/12/65 + 2/15/80 and bore 50 mm with 4/15/80 + 4/11/90. How to read and measure your hole pattern: Determining pin holes.

Cutting speed and rotational speed

n = vc × 1000 ÷ (π × D). Guide values: cermet in structural and carbon steel 100–250 m/min at 0.06–0.10 mm/tooth; PVD-coated carbide in steel 500–900 N/mm² 100–250 m/min, in austenitic stainless steel 80–120 m/min. Each product has a data sheet with cutting data and a speed table.

Regrinding and sharpening service

As Werkzeugservice Hoeß in Grünsfeld, we regrind TCT circular saw blades – including blades from other manufacturers: Sharpening service for circular saw blades.

Ordering and delivery

Order by noon for same-day dispatch. Shipping costs within Germany per order by quantity: 1–2 blades 8.90 €, 3–5 blades 14.80 €, 6–10 blades 21.90 € (each plus VAT); TCT and cermet circular saw blades are excluded from free shipping. Questions about size or pin holes: +49 9346 92230 or info@wsh-tools.de.

Custom-made blades and overview

Your size is not listed? Enter the diameter, thickness, bore, pin holes and number of teeth in the circular saw blade configurator – we make TCT circular saw blades from 1 piece. You will find all circular saw blades from WSH-Tools.de compared – metal, carbide, segmental, CV and saw blades for branch saws – in the circular saw blade overview.

Frequently asked questions about TCT and cermet circular saw blades

What is the difference between cermet and carbide?

Cermet is a ceramic-metallic cutting material (titanium carbonitride with a nickel-cobalt binder): very wear-resistant, heat-resistant and with a particularly smooth cut surface – ideal for series cutting in structural and carbon steel. Carbide (tungsten carbide with cobalt) is tougher and withstands higher cutting forces; PVD-coated (TiAlN, AlTiN), it is also suitable for higher-strength steels and stainless steel.

Which saw blade should I use for stainless steel?

For stainless and acid-resistant steel we recommend PVD-coated TCT circular saw blades (TiAlN or AlTiN) at a reduced cutting speed, for austenitic stainless steel about 80–120 m/min. Uncoated cermet blades are intended for structural and carbon steel.

Do TCT and cermet saw blades fit my HSS cold saw?

Only if the machine is designed for them. TCT and cermet blades work at cutting speeds of about 80–250 m/min, HSS blades at 10–50 m/min. Slow-running HSS cold saws do not reach the necessary speed; for those, our HSS metal circular saw blades are the right choice.

What does 285 × 2,0/1,75 × 40 mean?

Diameter × kerf width/body thickness × bore in millimetres: 285 mm diameter, 2.0 mm kerf width at the cutting edges, 1.75 mm thickness of the blade body and 40 mm bore. In addition come the pin holes of your clamping flange.

What do pin holes such as 4/9/50 + 4/11/63 mean?

Number/diameter/pitch circle of the drive holes: 4/9/50 means four holes of Ø 9 mm on a pitch circle of 50 mm. The pin holes must match the flange of your machine – please compare before ordering.

How many teeth do I need?

What matters is the tooth pitch T = π × diameter ÷ number of teeth. Coarse pitches (from about 16 mm) suit solid material of medium and large diameters, fine pitches (below about 11 mm) suit tubes and profiles. At least two to three teeth should always be engaged.

What speed do I need?

n = vc × 1000 ÷ (π × D). A Ø 285 mm blade at 150 m/min runs at around 168 rpm. Each product has a data sheet with guide values and a speed table; the machine manufacturer’s specifications take priority.

Can I have TCT circular saw blades reground?

Yes. As Werkzeugservice Hoeß in Grünsfeld, we regrind TCT circular saw blades – including blades from other manufacturers.

How fast are the saw blades delivered and what does shipping cost?

The blades are available from stock: order by noon for same-day dispatch. Shipping within Germany per order by quantity: 1–2 blades 8.90 €, 3–5 blades 14.80 €, 6–10 blades 21.90 € (each plus VAT). TCT and cermet circular saw blades are excluded from free shipping.

2026 © Werkzeugservice M&P Hoeß GbR | WSH-Tools.de